Socket Driver Set 3 Piece

Socket Driver Set 3 Piece

(2 reviews) Write a Review
£6.03
Stock Locations::
USA, CAN, UK, EU, AUS. Worldwide shipping available.

Description

Socket Driver Set comprising 3 Pieces. 

Chrome vanadium steel.

Converts drill and drill driver to socket driver.

Retaining ball for secure holding.

Drives 1/4", 3/8" and 1/2" sockets.

1/4" hex shank.

 

2 Reviews

  • 5
    I was unsure but it works

    Posted by Tan R. on 13th Oct 2021

    Saw this and thought this was a good idea after reading you can start an engine with it. He was right. I removed the pull start and use a socket and my drill and my little gen starts every time. Not sure best idea if using everyday as the fan is open. I am going to make a metal plate to cover the fan with a hole in the middle. So i can use it all the time.

    Generator Guru Response: if you make a plate be sure it has a lot of air holes as there is a high chance the engine will overheat otherwise. The fan you see is the engine fan and keeps the engine cool.

    Perhaps, if this is your plan, you use a Recoil housing for the cover as it has the correct amount of air vent holes.

    BE CAFEFUL WHEN OPERATING ANY ENGINE WITHOUT THE CORRECT COVERS IN PLACE AS THERE IS A POSSIBILITY OF LOOSE CLOTHING OR OTHER ITEMS GETTING CAUGHT IN THE ENGINE. THIS IS A RISK TO LIFE!!!!

    BE SURE TO REMOVE ANY LOOSE CLOTHING BEFORE PERFORMING SUCH ACTIONS!!

  • 5
    Strong and can use to start engine

    Posted by Tim on 23rd Oct 2020

    I use these to start pull start engines. Remove the recoil and put on flywheel nut. A short burst on drill and pull off as engine starts. Saves my shoulder. I am a small engine mechanic so very good as my shoulder hurts after all these years of pulling engines over. Thanks Generator Guru