Recoil Assembly 45305522

Recoil Starter Assembly 45305522

(5 reviews) Write a Review
£25.64

Description

 
 

Complete replacement recoil - Professional Version.

Made of tough steel for a long life. Extra strong return spring, easy-grip handle and extra long rope for easy starting. Buy now and get a free Connector cup!

Generator Guru says:

If the recoil wheel has broken on the original, then it is advisable to check the oil level and valve settings.

As an engine settles in, the valve clearances can change. When the valve settings are off, it creates a higher compression, which makes the engine harder to start and adds extra pressure to the Recoil parts.

Valve settings can be found in our 'Cylinder Head Parts' listings, (if available for your generator,) along with a video to show you how to do the job! If there is too much oil in the engine, it will also change the compression ratio. Remove any excess oil.

If you oil the rope with petroleum jelly, it will stop the rope from fraying.

**Colour may vary (picture for reference only)                                               *Compatible part

 

5 Reviews

  • 5
    Recoil

    Posted by Donald lind on 17th Jan 2020

    Worked great. Came as expected

  • 5
    Recoil

    Posted by Donald lind on 17th Jan 2020

    Worked great. Came as expected

  • 4
    Recoil assembly

    Posted by Donald Choquette on 18th Apr 2019

    I purchased this for ,y generator. The original had nuts welded to the underside of the cover to space the cover away from the mounting holes. I used three washers under each of the mounting holes to accomplish the same thing and give the necessary clearance. Worked great after that modification.

  • 5
    Better and perfect

    Posted by Yumi on 12th Apr 2018

    The piece look and is more stroger it fit perfectly on my generador. It work perfectly.

  • 5
    fit perfectly

    Posted by Barbara Garrett on 6th May 2017

    My husband installed this with no problem and said it was made differently than original equipment and we shouldn't have problems with the pin falling out. Good job on redesign. Works as it should.