Oil Alert Unit CDI Controller 89743520

Oil Alert Unit CDI Controller 89743520

(1 review) Write a Review
£30.59 £18.78
(You save £11.81)

Description

Replacement Oil Alert Sensor CDI

This part is prone to wearing out and can affect the running of the unit. Indications of this part wearing out are: 

  • engine not starting (no spark produced)
  • engine not governing (uneven or over revving running pattern)
  • engine runs for a short time then cuts out.

Generator Guru says:

It is not uncommon for this part to blow. If your engine is not starting, remove the yellow wire to the CDI and try to start it again. If it starts you need to replace the CDI. Do not run the engine without the CDI for any length of time, as it cannot shutdown the engine if there is a problem with the oil pressure, which can result in damage to the engine.

*Compatible Part

1 Review

  • 5
    Gret description helps solve problem

    Posted by Cary Binder on 12th Nov 2016

    I knew I had an ignition problem when the engine was stalling and thought I had an air leak when the engine was surging. I was able to troubleshoot to find that this module was probably bad and the description of the part pretty much nailed the symptoms on the head. Bought the part and it worked great.

    Thanks Generator Guru.