Governor Springs and Rod 77401446

Governor Springs and Rod 77401446

(3 reviews) Write a Review
£9.99
Stock Locations::
USA, CAN, UK, EU, AUS. Worldwide shipping available.

Description

Replacement Governor Springs and Rod. Available as a full set or individually. *Please click on part for price.

A full set includes:

1. Governor Rod

2. Governor Rod Spring (fits over the rod)

3. Governor Spring

Generator Guru says:

If your engine is revving, please check the following before opening the engine casing:

 1) Check the spring on the Governor Rod. This is the rod that goes from the top of your carb to the governor arm. Check if the spring is broken, becomes slack or has come off at either end. Replace if necessary.

 2) Check the Governor Arm spring. This sits between the engine and the governor arm. Replace if necessary.

 3) If step 1 & 2 has failed then your governor will need resetting. This is a complicated job and we suggest is only carried out by a mechanically minded person. (You will need 2 people)

 A) Person 2 - Pull gov arm to far right.

B) Person 1 holds with pair of pliers the governor spindle that protrudes from the engine, while Person 2 loosens the retaining bolt on the governor arm and lifts the governor arm straight upwards until it comes off. Do not turn the governor spindle while doing this.

C) Person 1 rotates the governor spindle as far clockwise as the spindle will turn.

D) Person 2 replaces the governor arm again in the far right position (throttle completely open) and tightens the retaining nut.

 

 4) If the above steps haven't solved this, you will need to open the engine and replace the Governor and/or the Governor Arm Shaft.

*Compatible part

3 Reviews

  • 5
    Springs and rods

    Posted by Lyndsay Keith on 21st Nov 2020

    Great product and was delivered when expected. Would definitely order from guru again

  • 5
    Governor & Linkage Springs

    Posted by Duane on 2nd Aug 2017

    New springs fit and worked perfect to replace originals . arrived quickly. Would buy again. Thanks!

  • 5
    Hunting and surging eliminated

    Posted by Alan Powell on 18th Mar 2014

    Helping a friend return his generator to service after a season or two unattended, I found the throttle spring broken due to rust and the governor spring nearly rusted away as well. The motor was hunting/surging under light or no load conditions due to the broken spring. After an internet search I found this replacement set available from the Gen Geru. I placed my order and after a few days found the well packaged parts in my mailbox. I installed the springs and rod, started the motor and saw that my problem had vanished. This was the first Chinese genset I have repaired and the availability of the correct parts as well as the ease of ordering was very helpful. Thank you Generator Geru!